Blog

How to Choose the Right Air Conditioner for Your Needs | Tips from Your Dallas, TX Air Conditioner Installation Professional

How to Choose the Right Air Conditioner for Your Needs | Tips from Your Dallas, TX Air Conditioner Installation Professional

Photo By Konstantin L at Shutterstock

The best time to install an air conditioning unit is when it’s not already hot outside, so fall and spring are both good options. However, it can be tough to choose the best air conditioner for your needs. Not only do you need the right type of air conditioner, you need to make sure it’s large enough and powerful enough to cool your Dallas, TX, home. If you want a simple air conditioner installation that doesn’t cost a fortune, here’s how you can pick the best AC.

Central Air Conditioning

Central air conditioning is the most common option for most homeowners because it provides plenty of cool air for large homes. However, central air conditioning is a little more involved than most types when it comes to air conditioner installation.

One of the biggest reasons to choose central air conditioning over other types is the fact that it provides adequate power for larger homes. If you’ve got a fairly big home that you need to cool, you can count on central AC to get the job done as long as you buy a big enough unit. With some of the weaker types of AC, you might not be getting that same cooling power.

The one thing you do have to keep in mind when it comes to central AC is the fact that you have to pay for a little bit more in terms of air conditioner installation. Central air conditioning uses ducts and vents to send air to various parts of your home, so those ducts have to be run and connected to the rooms in your home that you want to cool.

Ductless Mini-Splits

In recent years, ductless mini-split air conditioners have become another popular option. If you’re looking for a great way to cool your Dallas, TX, home without having to pay a fortune for air conditioner installation or tear apart your home, ductless mini splits are a good option.

One of the most surprising parts about ductless mini-split air conditioners is the fact that they provide so much cooling power. These air conditioners have separate units that can be installed in different rooms, each of which are connected to the main cooling source. This means that you can cool different rooms in your home separately, so cooling power isn’t as much of an issue.

Another great part about ductless mini-splits is the fact that you can control the temperature in different areas of your home separately. Whereas central AC is designed to bring your whole home to a specific temperature, each mini-split unit you install in a room has separate settings to give you more control. If you have one person in your household who likes colder temperatures, they can set their AC a little bit lower without having to freeze out the rest of the house.

As far as air conditioner installation goes, ductless mini-splits are fairly easy to install because they don’t require the same type of duct work that central AC does.

Geothermal Heating & Cooling

If you want to be on the cutting edge of heating and cooling technology, geothermal heating and cooling is one way to do that. Geothermal heating and cooling works by either taking heat from your home and putting it back in the ground or taking heat from the ground and sending it to your home. While geothermal cooling is more expensive in terms of upfront cost and air conditioner installation costs, it has a lot of potential for the future.

Installing a geothermal heating and cooling system in your Dallas, TX, home means you can get your warm and cold air directly from the earth. While this isn’t free, it’s a lot more efficient than using coolant or some type of gas to keep the temperature in your home at a constant.

One of the biggest reasons to avoid geothermal heating and cooling is the fact that we don’t fully know about the environmental effects it has at this point. There have been some fairly major issues with geothermal energy, and the gases from geothermal heating and cooling have the potential to become trapped underground and release into the atmosphere. Nevertheless, geothermal cooling is a solid option.

Size, Power & Efficiency

When it comes to paying for air conditioner installation by HVAC professionals, one of the biggest things you’re paying for is an AC that’s properly sized for your needs. While it might seem beneficial to simply buy the largest, most powerful AC for your Dallas, TX, home, that can actually leave you paying a lot more for your AC unit and spending too much on your electric bill.

Whether you pick your own AC unit or have an air conditioner installation professional help with the decision, it’s important to do your research to figure out what size of AC you need. You can find plenty of calculators online to help with that, but it’s best to leave that decision up to a professional.

Another thing you have to consider when shopping for an AC unit is the efficiency of the unit. The efficiency rating on a unit essentially determines how much you’ll be spending on your cooling bill, so you should always consider that before paying for air conditioner installation.

Make It Easy

You need to have a good AC when it comes to surviving the hot Dallas, TX, summers, but that doesn’t mean it’s easy to pick the right unit. Not only do you need to choose the right type of unit for your needs, you also need to make sure you’re buying a powerful enough AC unit that’s also efficient.

Fortunately for you, you can make that decision a lot easier by choosing Garland Heating and Air for your air conditioner installation needs. If you need help picking out an AC unit and getting it installed, give us a call at (972) 278-3506 today.

Contact Us

© GARLAND HEATING AND AIR CONDITIONING. All rights reserved.