If you are experiencing problems with your HVAC system that is continuously tripping a breaker, you might have a serious and even potentially dangerous problem on hand. Circuit breakers help by preventing electrical fires, shock and other potential electrocution methods by shutting down the electricity to an affected area of the home whenever there is a short, or too much electrical current going through them. As an example, whenever an external surge happens, the circuit breaker will detect the incoming excessive voltage and trip the breaker to shut off the circuit.
Potential causes for a tripped breaker can include a faulty breaker itself, and a short. If you are having a problem similar to this where your air conditioning system is tripping your breaker constantly then quit using the air conditioning, contact Garland Heating and Air and schedule for heating and cooling repair in Dallas, TX.
Electrical issues within your air conditioning system can also cause a circuit breaker to trip. There could be a loose wire in the system that is causing the problem, or there could be a damaged wire in either the AC unit itself or the circuit between the electrical panel and the AC. The culprit could be a loose wire, a power surge, lightning, or even rodent damage.
Any of the above is more common than this, but even though it is uncommon, a tripped breaker can also be due to a bad breaker itself. Everything eventually wears out over time, and damage may occur to a breaker whenever there is excessive voltage such as from a power surge or even lightning.
Overloading the circuit will also trip breakers. For example, if a problem occurs in the air conditioner, it may cause the unit to pull excessive voltage, over heating the wires, and then triggering the breaker to trip. An overheated air conditioning system could be due to a refrigerant leak, or a component going out can result in a breaker tripping. These conditions will all require a professional technician to inspect the system and provide heating and cooling repair in Dallas, TX.
Whenever a circuit breaker is replaced with different amperage than is required, circuit breakers can also trip, and a fire may possibly occur if an over-sized one is purchased. Only replace breakers with the correct size. Other possible causes are as follows:
Filter – Check the HVAC system’s filter, if it is excessively dirty it will obstruct the air flow to your system, and this can cause the air conditioner to overheat, if the filter is soiled, change it and attempt to turn on the air conditioner again.
Coils – The coils for your HVAC system are essential in the performance of the system. First, inspect the outside condensing unit. If there are leaves, grass or soil, this may be the catalyst to what is causing the circuit breaker to trip. Contact your HVAC technician for a thorough cleaning of your heating and cooling system as well as any other heating and cooling repair in Dallas, TX that may be needed.
Refrigerant – If the refrigerant in the system is low, this indicates a leak, but more importantly it can also cause the system to overheat and trip the circuit breaker. In order to resolve this you will need to get in touch with Garland Heating and Air Conditioning and schedule an appointment for heating and cooling repair in Dallas, TX.
Wiring – over time the wiring will expand and contract and this can end up making wires become loose. Due to the danger from high voltage in the system, homeowners should not attempt to fix these themselves, instead contact your technician at Garland Heating and Air Conditioning to schedule heating and cooling repair in Dallas, TX.
If you are having problems with your home’s heating and cooling system continuously tripping the circuit breaker in your panel box and you are not sure what is causing it. Do not turn the air conditioning back on until you contact Garland Heating and Air Conditioning and schedule an appointment to have your heating and cooling repair in Dallas, TX. Once scheduled, one of our NATE certified technicians will come out to your home assess the problem, find the underlying cause, and make all of the necessary repairs to get your heating and cooling back up and running promptly and professionally. A system that flips your circuit breakers can be extremely dangerous, you should not tinker around with the system trying to find the problem yourself whenever this happen. Give Garland Heating and Air Conditioning a call today.
About Garland Heating and Air Conditioning
Garland Heating and Air Conditioning has been helping homeowners and businesses alike in Dallas, Texas and surrounding areas for many years with heating and cooling repair in Dallas, TX. We are one of the leading heating and air companies in the area. Dedication, determination and professional services that you can rely on have helped made us the go to source for customers in the area who are in need of heating and cooling repairs, installations and maintenance. When you contact Garland Heating and Air Conditioning in Dallas, Texas you can rest assured knowing that you are receiving high quality professional heating and cooling repair in Dallas, TX that is both reliable and affordable.
Garland Heating and Air Conditioning in Dallas, Texas is a leader in the HVAC field servicing Dallas, Plano, and surrounding areas. Our NATE certified technicians provide professional HVAC related services, installation and repairs. If you are looking for help with your home or business’ HVAC system and need heating and cooling repair in Dallas, TX in Dallas, TX do not hesitate to give us a call today. One of our professional technicians will be more than happy to assist you and schedule a service call heating and cooling repair in Dallas, TX your earliest convenience. Garland Heating and Air Conditioning is a proud member of the BBB and maintains a rock solid A+ rating.